Riflescopes Blog

GREELEY, Colo. (January 17, 2012) – Burris, the unequivocal expert in ballistic laser scopes with automated trajectory compensation, introduces the new Eliminator III. This next-generation laser scope provides expert shooters with a level of sophistication only imaginable before now.

The Eliminator III features a sleek, new design that is similar to traditional riflescopes yet still incorporates state of the art electronics. Other improvements include new ergonomic activation buttons and parallax adjustment from 50 yards to infinity.

Rob Siemers, Burris Company general manager, said, “With the new Eliminator III, we have defined the next generation of modern riflescopes that incorporate technology and electronics with optical design. As the leader in this category, we are excited about the potential these new products will offer to hunters and long-range shooters.”

The current Eliminator’s split-second, automatic trajectory compensation technology has provided shooters with the invaluable ability to place ethical shots on target within seconds, which dramatically extends a shooter’s confidence and ability in the field. Now, the new Eliminator III with its X96 reticle technology provides even more accuracy, more range and a method of windage compensation. All of these elements have been perfected and are available at the push of a button at any magnification.

To achieve even greater accuracy at ranges from 750 to 1,200 yards, the Eliminator III features enhanced the ballistic programming. With the Eliminator III, the shooter enters not only the amount of drop at 750 yards for bullet and load he is shooting, but the ballistic coefficient (BC) for the chosen bullet, as well. The scope can be programmed for more than 1,500 commercially available loads.

An essential element in the Eliminator III is the new X96 reticle, which provides a convenient and accurate method to compensate for wind. Wind compensation is NOT fully automated within the scope; the digital readout displays a 10 MPH Wind Value for the shooter’s specific cartridge at the ranged as a “Dot Value.” The X96 reticle features several dots on each side of the vertical post. These Dots serve as references to the shooter to precisely hold into the wind. The shooter still needs to estimate the cross-wind value himself and also needs to convert the 10MPH Wind Value displayed to the appropriate value for the estimated actual MPH cross-wind value. The shooter then holds into the wind the appropriate “Dot Value” as shown below in the illustration below.

The Eliminator III will retail for $1,499 and will be available at retailers in July.

Founded in 1972 and headquartered in Greeley, Colo., the Burris Company offers a complete line of premium optics which includes riflescopes for hunting, competition, law enforcement and military; handgun scopes; binoculars; spotting scopes; mounts and accessories. For more information, write to the Burris Company, 920 54th Avenue, Ste. 200, Greeley, CO 80634. For detailed product information, visit the company website at www.burrisoptics.com. Visit us on Facebook at www.facebook.com/BurrisOptics.
# # #

Eliminator III Specifications:
Length (Inches) 15.75 (max)
Weight (oz) 26
Actual Magnification (low) 4X
Actual Magnification (high) 16X
Field of View (Low/High at 100 yards) 25′ – 7′
Adjustable Parallax (yards) 50 – Infinity
Laser Performance (yards reflective) 1200+
Laser Performance (yards deer) 750+
Battery Life 5000 cycles
Reticle Plane 2nd plane
Adjustment Click Value 1/4 MOA
Eye Relief (minimum range) 3.5″ – 4.0″
Waterproof yes
Fogproof yes
Shockproof yes
Temperature Function 0 – 140 °F

Contact:
Karen Lutto (830) 755-4308 or karen@hunteroc.com
Mike Nischalke (703) 385-3595 or mike@hunteroc.com
HOC Website: www.hunteroc.com

BEAVERTON, Ore. – Redfield’s new Revenge™ line offers an exclusive “in-scope” ballistic ranging system and other premium features at commonly affordable prices for hunters and shooters. The line includes five riflescope magnifications as well as a scope for crossbow hunting.

Revenge is the second Redfield®-branded riflescope from Leupold & Stevens, Inc., joining the popular Revolution™ introduced in 2010. The new Accu-Ranger Ballistics System™ is unique to Revenge riflescopes. It allows hunters to determine the distance to commonly hunted animals and helps enhance shooting accuracy at longer ranges-out to 600 yards-without taking eyes off the target. With Accu-Ranger, there is no need to go back and forth between scope and rangefinder when setting up for a shot.

Revenge riflescope magnifications include 2-7×34mm, 3-9×42mm, 3-9×52mm, 4-12×42mm and 6-18×44mm. The Accu-Ranger system is available in all riflescope models except the 2-7×34mm. In addition, the Revenge 2-7×34mm ABS Crossbow scope comes with the Accu-Ranger Crossbow reticle.

“The Redfield Revenge is an all-new, one-of-a-kind series of riflescopes featuring our exclusive new Accu-Ranger Ballistics System,” said Pat Mundy, communications manager for Leupold & Stevens, Inc. “These riflescopes continue the Redfield tradition of top-notch optics priced within the means of most every hunter.”

With Accu-Ranger, the hunter simply uses the riflescope’s power selector ring to bracket the animal’s torso between the horizontal line of the reticle and the bottom of the top post. After determining the yardage from the reticle numbers, the hunter zooms the scope up to its highest power, and then uses the appropriate aiming point to shoot. Specific Accu-Ranger reticles include the Hunter, Sabot, Varmint and Crossbow. Other reticle options for Revenge riflescopes include the 4-Plex and Fine Plex, depending on model.

Additional riflescope features include:

Fully multicoated lens system for outstanding image brightness, clarity and resolution. Performs well in low-light conditions.
Pop-up, resettable ¼-MOA windage and elevation adjustments. Ensures adjustment precision and reliability, and a wide range of adjustment travel.
Fast-focus eyepiece. Makes reticle focus easy to achieve and maintain.

Revenge riflescopes have a one-inch maintube and are nitrogen filled to make them waterproof, fog proof and shock proof. Exhaustive testing in the factory and field ensures the riflescopes’ reliability and durability. They are covered by the Redfield Limited Lifetime Warranty.

Manufacturer’s suggested retail prices range from $139.99 to $269.99. For more information, visit www.redfield.com or call 877-798-9686.

Acquired by Leupold & Stevens, Inc. in 2008, Redfield is now a brand of the Oregon-based company. The Redfield line includes Revolution™ and Revenge™ riflescopes, Rebel™ roof prism and Renegade™ Porro prism binoculars, Rampage™ spotting scope kits and Raider™ rangefinders. The Redfield Gun Sight Company was founded in 1909 by John Hill Redfield. Over the years, Redfield became one of the leading American manufacturers of sports optics, known for the performance, ruggedness and reliability of its products. The new Redfield line upholds that tradition and is sold worldwide to hunters, shooters, wildlife observers and other outdoor enthusiasts.

Contact:
Patrick Mundy (503) 526-1467 or pmundy@leupold.com
Jeff Patterson, Swanson Russell, (402) 437-6410 or jeffp@swansonrussell.com

BEAVERTON, Ore. – Designed to provide hunters and shooters with best-in-class riflescopes, Leupold’s 2012 VX®-1 line offers a variety of new features at prices that essentially remain the same as those for VX-I in 2011.

“VX-1 replaces the VX-I (Roman numeral designation) line and has features that were formerly reserved for higher-end Golden Ring® riflescopes,” said Pat Mundy, communications manager for Leupold & Stevens, Inc. “No other scopes in VX-1’s class can match its quality, performance and value, especially since we were able to hold the line on price.”

Leupold’s Quantum Optical System™ highlights the new VX-1. Tailored specifically for this riflescope line, the system includes lead-free, precision-ground and polished lenses with Leupold’s exclusive Multicoat 4® coatings for enhanced resolution, clarity and contrast. Carefully positioned in optimum relationship to each other, the lenses deliver up to 92 percent total light transmission.

Other features include finger-adjustable, ¼-MOA click windage and elevation dials that allow quick zeroing and easy adjustment in the field. The power selector ring incorporates a tactile indicator, making it easy to grasp and turn even while wearing gloves. A fast-focus eyepiece with a low-profile lock ring makes reticle focus easy to achieve and maintain.

VX-1 sports modern styling with a gold-plated Leupold® medallion highlighting the exterior design. Like all Golden Ring riflescopes, VX-1 is waterproof, shockproof and fog proof.

Magnifications in the VX-1 line include 2-7×33mm, 3-9×40mm, 3-9×50mm and

4-12×40mm, with a variety of reticle and finish options for different hunting styles, game and ranges. The line also includes Shotgun/Muzzleloader and Rimfire models. Suggested retail prices range from $210 to $320.

Built for rugged use with a one-inch maintube manufactured from 6061-T6 aircraft-quality aluminum alloy, VX-1 is covered by Leupold’s Full Lifetime Guarantee.

For more information, visit a local dealer, go to www.leupold.com or call 1-800-LEUPOLD.

Leupold & Stevens, Inc., the preeminent American-owned optics company, employs hundreds of people in its state-of-the-art manufacturing facility near Beaverton, Ore. Family owned and operated, Leupold offers products that are sold worldwide to hunters, competitive shooters, American military warfighters, law enforcement personnel and wildlife observers. The product line includes rifle, handgun and spotting scopes; binoculars; rangefinders; trail cameras; mounting systems; and optical tools and accessories.

Contact:
Patrick Mundy (503) 526-1467 or pmundy@leupold.com
Jeff Patterson, Swanson Russell, (402) 437-6410 or jeffp@swansonrussell.com

BEAVERTON, Ore. – Leupold® has replaced its VX®-II (Roman numeral designation) riflescope line with new VX-2 models that offer even greater optical performance and value for hunters and shooters.

With no increase from the 2011 prices for VX-II riflescopes, VX-2 has a number of new features including Leupold’s exclusive Quantum Optical System™, which is specially designed to make the most of available light.

“VX-2 takes this class of riflescopes to another level,” said Pat Mundy, communications manager for Leupold & Stevens, Inc. “Hunters and shooters can expect superior performance and quality that helps them be successful in the field, at close or long ranges, under most any conditions.”

The Quantum Optical System is tailored specifically for VX-2, and includes lead-free, precision-ground and edge blackened lenses with Leupold’s exclusive Index Matched lens coatings for superior resolution, clarity and contrast. Carefully positioned in optimum relationship to each other, the lenses deliver up to 94 percent total light transmission. Exterior lens surfaces with DiamondCoat™ resist abrasion.

Other key features are an externally threaded fast-focus eyepiece and finger-adjustable, ¼-MOA (one cm on German #4 reticle models) click windage and elevation dials that enable quick, easy zeroing. Select VX-2 models are available with Custom Dial System (CDS®) elevation dials or high-profile target adjustment knobs for long-range shooting precision.

An all-new one-inch maintube features an advanced power selector design incorporating a tactile power indicator and easy-to-read numbers. Leupold’s second-generation waterproofing utilizes an exclusive Argon/Krypton gas blend that resists thermal shock and ensures a fog-free image.

VX-2 riflescopes come with a variety of reticle and finish options for different hunting styles, game and ranges. Leupold’s exclusive Ballistics Aiming System® reticle options for hunters include the LR Duplex® and LRV Duplex®. VX-2 magnifications include 1-4×20mm, 2-7×33mm, 3-9×40mm, 3-9×50mm, 4-12×40mm and 4-12×50mm. For parallax adjustment control, there are also 4-12×40mm Adjustable Objective, 6-18×40mm Adjustable Objective and 6-18×40mm Adjustable Objective Target models. In addition, Ultralight™ and Rimfire models are offered.

VX-2 riflescopes have modern, sleek lines and sport a stylish gold-plated Leupold medallion. Each comes with a protective cover. Suggested retail prices range from $300 to $600.

Built for rugged use and years of service, VX-2 is covered by Leupold’s Full Lifetime Guarantee. For more information, visit a local dealer, go to www.leupold.com or call 1-800-LEUPOLD.

Leupold & Stevens, Inc., the preeminent American-owned optics company, employs hundreds of people in its state-of-the-art manufacturing facility near Beaverton, Ore. Family owned and operated, Leupold offers products that are sold worldwide to hunters, competitive shooters, American military warfighters, law enforcement personnel and wildlife observers. The product line includes rifle, handgun and spotting scopes; binoculars; rangefinders; trail cameras; mounting systems; and optical tools and accessories.

Contact:
Patrick Mundy (503) 526-1467 or pmundy@leupold.com
Jeff Patterson, Swanson Russell, (402) 437-6410 or jeffp@swansonrussell.com

Wixom, MI- The undisputed leader in battlefield optics adds another model to its proven ACOG (Advanced Combat Optical Gunsight) line with the introduction of its 4×32 Battery ACOG.

The new 4×32 Battery ACOG provides operators six dialable levels of reticle intensity when conditions demand them. Thanks to Trijicon’s engineering advancements in optical efficiency, the 4×32 Battery ACOG provides over 12,000 hours of red, non-forward emitting illumination from one AA battery.

“Some might wonder, why put a battery in an ACOG? Shooters the world over love their Trijicon ACOG but if there is an improvement that can be made, most would agree that the ability to adjust the reticle illumination would be a great upgrade. This is the main reason for developing the battery ACOG,” says Tom Munson, Trijicon Director of Sales & Marketing.

Forged aluminum, mil-spec construction produces a waterproof/fog-proof unit that’s second to none in durability. Premium, fully multi-coated optics and parallax-free, 4-times magnification combined with precise, 1/2-inch click adjustments assure shot-after-shot accuracy even in adverse conditions.

For more information on the 4×32 Battery ACOG and the complete array of Brilliant Aiming Solutions™ for the hunting, shooting, military and law enforcement markets, contact Trijicon®, Inc. at (248) 960-7700 or visit www.trijicon.com.

Contact:
Eddie Stevenson (210) 259-8491

GREELEY, Colo. (January 17, 2012) - Burris, the unequivocal expert in ballistic laser scopes with automated trajectory compensation, introduces the new Eliminator III. This next-generation laser scope provides expert shooters with a level of sophistication only imaginable before now.

The Eliminator III features a sleek, new design that is similar to traditional riflescopes yet still incorporates state of the art electronics. Other improvements include new ergonomic activation buttons and parallax adjustment from 50 yards to infinity.

Rob Siemers, Burris Company general manager, said, “With the new Eliminator III, we have defined the next generation of modern riflescopes that incorporate technology and electronics with optical design. As the leader in this category, we are excited about the potential these new products will offer to hunters and long-range shooters.”

The current Eliminator’s split-second, automatic trajectory compensation technology has provided shooters with the invaluable ability to place ethical shots on target within seconds, which dramatically extends a shooter’s confidence and ability in the field. Now, the new Eliminator III with its X96 reticle technology provides even more accuracy, more range and a method of windage compensation. All of these elements have been perfected and are available at the push of a button at any magnification.

To achieve even greater accuracy at ranges from 750 to 1,200 yards, the Eliminator III features enhanced the ballistic programming. With the Eliminator III, the shooter enters not only the amount of drop at 750 yards for bullet and load he is shooting, but the ballistic coefficient (BC) for the chosen bullet, as well. The scope can be programmed for more than 1,500 commercially available loads.

An essential element in the Eliminator III is the new X96 reticle, which provides a convenient and accurate method to compensate for wind. Wind compensation is NOT fully automated within the scope; the digital readout displays a 10 MPH Wind Value for the shooter’s specific cartridge at the ranged as a “Dot Value.” The X96 reticle features several dots on each side of the vertical post. These Dots serve as references to the shooter to precisely hold into the wind. The shooter still needs to estimate the cross-wind value himself and also needs to convert the 10MPH Wind Value displayed to the appropriate value for the estimated actual MPH cross-wind value. The shooter then holds into the wind the appropriate “Dot Value” as shown below in the illustration below.

The Eliminator III will retail for $1,499 and will be available at retailers in July.

Founded in 1972 and headquartered in Greeley, Colo., the Burris Company offers a complete line of premium optics which includes riflescopes for hunting, competition, law enforcement and military; handgun scopes; binoculars; spotting scopes; mounts and accessories. For more information, write to the Burris Company, 920 54th Avenue, Ste. 200, Greeley, CO 80634. For detailed product information, visit the company website at www.burrisoptics.com. Visit us on Facebook at www.facebook.com/BurrisOptics.
# # #

Eliminator III Specifications:
Length (Inches) 15.75 (max)
Weight (oz) 26
Actual Magnification (low) 4X
Actual Magnification (high) 16X
Field of View (Low/High at 100 yards) 25′ – 7′
Adjustable Parallax (yards) 50 – Infinity
Laser Performance (yards reflective) 1200+
Laser Performance (yards deer) 750+
Battery Life 5000 cycles
Reticle Plane 2nd plane
Adjustment Click Value 1/4 MOA
Eye Relief (minimum range) 3.5″ – 4.0″
Waterproof yes
Fogproof yes
Shockproof yes
Temperature Function 0 – 140 °F

Contact:
Karen Lutto (830) 755-4308
karen@hunteroc.com

Mike Nischalke (703) 385-3595
mike@hunteroc.com
HOC Website: www.hunteroc.com

Cranston, Rhode Island – SWAROVSKI OPTIK NORTH AMERICA, a subsidiary of the Austrian-based company, announces the Custom Ballistic Turret for all of their BT scopes.

The Custom Ballistic Turret (BT) allows the hunter to have a pre-determined zero and set of down range distances engraved on the turret. Once set up, you simply turn the turret to the appropriate down range distance, so you can hold the crosshair precisely where you want the bullet to hit. To get back to your zero setting, simply turn the turret back where it will automatically stop at your pre-set zero setting. The shooter will still have to accurately determine distance to the target (as with a laser range finder), and account for wind when necessary.

Tom Hogan, of SWAROVSKI OPTIK NORTH AMERICA says, “The SWAROVSKI OPTIK BT Turret system has become extremely popular and is now offered on the Z6(i), Z5 and Z3 series rifle scopes. The addition of the optional Custom BT with 50 yard increment settings, has now upgraded the versatility of the BT system to allow a hunter to make long range shots with greater precision and confidence.”

In order to obtain the Custom Ballistic Turret, you can order one by calling SWAROVSKI OPTIK’S Customer Service Department at 800-426-3089 and supplying them with all cartridge/load data.

Contact:
Dean J. Capuano, Communications Manager 800-426-3089 x2957 or Dean.Capuano@swarovskioptik.us

Wixom, MI – A brilliant solution for the precision target shooter, professional operator or long-range hunter, Trijicon introduces its TARS™ High-Performance RifleScope.

The Trijicon TARS (Tactical Advanced RifleScope) is a 3-15x variable magnification, 50 mm-objective, illuminated-reticle optic designed for tactical and sporting rifles. Premium-grade optics, exact adjustments, and innovative reticle systems allow users to engage targets at extreme ranges.

Best-quality glass is fully multi-coated to allow maximum light transmission. Optical engineering advancement produces a generous 3.3 inches of constant eye relief while decreasing overall scope length to 13.9 inches. Its 3x to 15x magnification range make it a viable choice for myriad applications, from LE and military operations to benchrest competition to varmint and big-game hunting.

The TARS features a patented illuminated-reticle system with 10 levels of intensity, including two for use with night-vision optics. Its non-forward emitting LED is much more efficient than current systems; One CR2032 battery provides 30,000 hours of use. Four reticle choices are available-an intuitive MOA reticle (Model 101), Trijicon-exclusive JW mil-square reticle (103) and two duplex versions (102 and 104). All are located in the first focal plane, so subtension values remain constant across the magnification range.

A robust, 34 mm main tube machined from aircraft-grade aluminum combined with Trijicon’s mil-spec construction ensure TARS can handle severe recoil in the harshest environments. It is waterproof to 66 feet. Hydrophobic coatings on exposed lenses ensure clarity in wet conditions. Finger-adjustable turrets feature patent-pending lockable, tactile click adjustments for positive tracking and repeatability. A side-mounted parallax dial focuses from 10-feet to infinity. Removable flip-up range caps and sunshade are included.

With Trijicon’s proven battlefield performance and uncompromising commitment to perfection, TARS will prove itself as a superior tactical riflescope for long-range marksmen.

For more information on TARS and the complete array of Brilliant Aiming Solutions™ for the hunting, shooting, military and law enforcement markets, contact Trijicon®, Inc. at (248) 960-7700 or visit www.trijicon.com.

###

Specifications

Operating Principal: Magnified, First Focal Plane
Optical Magnification: 3X – 15X
Focal Plane: First Focal Plane
Theoretical Eye Relief : 3.33 – 3.25 in (84.5- 82.5 mm)
Exit Pupil: 0.66 – 0.13 in (16.7 – 3.3 mm)
Field of View: 7.15o – 1.43o; 37.5 – 7.5 ft (10.4 – 2.1 m) @ 100 yards
Parallax: Side-focus parallax compensation from 40 m to infinity
Adjustment Range:
MOA Variant:
——Elevation: ±75 MOA (150 MOA total travel)
——Windage: ±60 MOA (120 MOA total travel)
——30 MOA per revolution
MIL Variant:
——Elevation: ±22 MIL (44 MIL total travel)
——Windage: ±18 MIL (36 MIL total travel)
——10 MIL per revolution
Adjustment Increments: MOA Variant: ¼ MOA per click ; MIL Variant: 0.1 MIL per click
Optical Coating: Full multi-layer coating per MIL-C-14806A or broadband anti-reflective coating, Hydrophobic coating on exposed Objective and Ocular lenses
Reticles : MOA, JW MIL-SQUARE, Duplex
Reticle Color: Red
Optical Signature: Zero forward emission

Power Source
Reticle Illumination:
——Red Light Emitting Diode (LED)
——Center cross illumination
——Push Button Control – Single button press or hold and step through
——Illumination Settings (10): Night Vision 1, Night Vision 2, Tritium Equivalent, Dusk/Dawn 1, Dusk/Dawn 2,
Day 1, Day 2, Day 3, Day 4, Intense Sun
Battery : (1) CR2032 Battery

Physical Specifications
Length x Width x Height: 13.9 in (353 mm) x 3.8 in (97 mm) x 3.5 in (89 mm), without objective sun shade
Weight: 47 oz. (1332 g), without objective sun shade
Removable Objective Sun Shade: Adds 3.0 in (75 mm) to overall scope length
Material – Housing: 6061-T6 aluminum, hard coat anodized per MIL-A-8625, Type III, Class 2, dull & nonreflective
Internal Gas: Dry Nitrogen Filled

Contact:
Eddie Stevenson (210) 259-8491